2012 Wuxi Drag Chain Conveyor Transport Waste with Best Design and Price

Drag Chain Conveyor Transport Waste 1.set of support constructions 2.set of chutes 3.low noise 4.chain drag conveyor

2012 Wuxi Drag Chain Conveyor Transport Waste with Best Design and Price

1.Picture

2.Technical Application

Chain Plate Conveyor is one of MD snake conveyors which can convey powder and small powdery, granular material in closed casing, consists of head part, upper horizontal section, upper bending section, vertical section, lower bending section, lower horizontal section and tail part, is a kind of 3D conveying mode combined the horizontal and vertical. It's driven by rolling friction, low power consumption, stable conveying, enclosed and no contamination. Inlet and outlet location and number can be established at random and transportation volume is flexible. It is widely used in metallurgy, chemical industry.

Technical Form

Model	MD100	MD200	MD250	MD350	MD400
Hoisting Height(m)	3-20	3-20	4-20	5-20	5-20
Conveying Capacity (m³/h)	3	8	18	36	45

Special Design Features:

8mm thick Brinell 500 abrasion resistant steel bottom plate liner.Side panels angle liners with 8mm thick Brinell 600Abrasion resistant steel wear strips( full length)Off inspection panels in casings .Drain Spigot in tension endChain : twin stand conveying chain having drop forged ,case hardened alloy steel haulage members,case hardened alloy steel connecting pins with securing circlips .Pitch : 142mmCas Hardening : 57RockwellCBreaking Load : 2x280KNFlight Configuration : I

3.Warranty time

Usually we provide 12 months  for quality time after delivery .

4.Packing Style

5.Price

If your inquiry is the only one send to us ,we will give special attention as well as favorable price policy to you.

6.Customers' Notice

Each conveyor is not standard.There is no stock at our factory.We design and fabricate conveyor according to customer's specific requirements and technical datas.If you are interested in our goods ,do not hesistate to send us your requirements with specifc datas.Your specific inquiry will receive immediate attention.

7.Delivery Time

(1)For Chinese Brand's Motor & Gearbox ,it takes 3~4 weeks for manufacture.

(2)For Imported Brand's Motor & Gearbox (eg.SEW,ABB),it takes 5~7 weeks for manufacture.

 We welcome you and your cusotmers to visit our company for discussing business together.

2012 Wuxi Drag Chain Conveyor Transport Waste with Best Design and Price